Hack Kit Lite
The Hack Kit Lite was available as a reward in our original Meadow Kickstarter project, and is discontinued.
Contents
 Send environmental data to Azure IoT Hub via AMQP or MQTTHackster | Source Code |  Meadow Rover Part 2: Remote Control over BluetoothHackster | Source Code |  Configure Meadow's WIFI over BluetoothHackster | Source Code |
|
|
|
| Item | QTY | Description |
|---|---|---|
| Hack Kit Box | 1 | Box that holds all the hack goodies. |
| Laser-etched Baseboard | 1 | Baseboard that holds a Meadow and a Half+ size breadboard for prototyping. |
| Half+ Breadboard | 2 | Breadboard for quick, temporary, prototyping. |
| Wire Jumpers (M/M, M/F, F/F) | 1 | A set of flexible jumper wires for breadboard prototyping. |
| Rotary Encoder w/Pushbutton + Knob | 1 | Continuous rotation digital input knob with integrated pushbutton. |
| Micro Servo | 1 | Motor with precision 180º rotation control. |
| 2-Channel Relay Board | 1 | Digitally controlled, isolated circuit switch for controlling external power, often used to switch household mains electricity (110V/240V AC). |
| Red, Green, Blue (RGB) LED | ~5 | 3-component Light-Emitting-Diode (LED) that can display nearly any color by varying the red, green, and blue input voltage. |
| Various Color LEDs | ~15 | 5 types of single-color LEDs. |
| Piezo Speaker | 1 | Simple, single-frequency sound emitting device for generating tones, beeps, and other simple sounds. |
| Push Button (Various Colors) | ~10 | Simple tactile switches in a variety of colors. |
| Photoresistor | 1 | Sensor that can measure the amount of light it receives. Needs to be wired up as part of a voltage divider. See the Resistive Sensor Lab |
| LM35DZ Analog Temperature Sensor | 1 | 0ºC - 100ºC temperature sensor with analog output. |
| 74595 Shift Register | 1 | 8-port digital output expander chip. Adds 8 additional DigitalOutputPorts to a Meadow. Can be chained up to 8 for 64 total additional outputs. |
| MCP23008 IO Expander | 1 | 8-port digital IO expander chip that connects via SPI. Adds 8 additional digital ports that can be used as output or input with changed notification support. |
| H-Bridge Motor Controller | 1 | SN754410. Provides digital control for two motors using an external power source, controlled via PWM. |
| Rainbow LED Battery Bargraph | 1 | Green, yellow, red, LED array that has a battery shape. |
| 4x20 LCD Character Display | 1 | LCD character display that's 4 lines tall and 20 characters wide. Can be used with TextMenuDisplay to display text menus. |
| Resistor Kit | 1 | ~300 resistors of varying resistance. |
| Resistor Network Kit | 1 | 1 |
| Capacitor Kit | 1 | Various value capacitors for general digital circuit usage. |
| 1N4004 Diode | ~4 | General purpose, 1A power rectification diode. |
| Temt6000 Luminosity Sensor | 1 | 1 |
| USB Breakout | 1 | Used to expose the 5V and GND pins of a USB adapter so that it can be used as an external power supply to drive motors, and such. |
| DC Motor | 1 | 6V motor that can be used in conjunction with either the motor controller or BJTs and a 5V power source. |
| 1N914 Diode | 4 | |
| 1N5817 Diode | 2 | |
| BS170 N-Channel MOSFET | 4 | |
| TIP120 Power Transistor | 1 | |
| 2N3904 NPN Transistor | 2 | |
| 2N3906 PNP Transistor | 2 | |
| SPDT Switch | 2 | |
| M2x8MM Hex Bolts | 4 | |
| Jumper Kit | 1 | |
| Photodiode | 1 | |
| M2 Nuts | 8 |